INTSCWPUB: Help

Overview

A Science Window (ScW) is a continuous time interval during which all data acquired by the INTEGRAL instruments result from a specific S/C attitude orientation state. Pointing (fixed orientation), Slew (changing orientation), and Engineering (undefined orientation) windows are all special cases of a Science Window. The key is that the same attitude information may be associated with all acquired data of a given Science Window. Note that it is possible to divide a time interval that qualifies as a Science Window under this definition into several smaller Science Windows using arbitrary criteria.

The INTEGRAL Public Pointed Science Window Data Catalog is a subset of the INTEGRAL Science Window Data Catalog. It only includes pointed science windows that have non-private proprietary status and at least one instrument's "good" exposure time greater than zero.

References

Further information and analysis results can be found linked from the INTEGRAL GOF page at the URL http://heasarc.gsfc.nasa.gov/docs/integral/integralgof.html

Provenance

The HEASARC version of this table is updated automatically within a day of the ISDC updating their database table.

Data Products

   Science Window Data: This consists of the entire science window directory
               tree.

   Revolution Data: This consists of the data corresponding to the revolution
               during which the science window occurred.

   Auxiliary Revolution Data: Additional revolution data specific the
               revolution during which the science window occurred.

   Auxiliary Reference Data: This reference data is the same for all
               observations. It is not necessary to download this each time.

HEASARC Implementation

Note that some of the parameter names were changed to make them more readable, easier to understand, and fit in better with HEASARC parameter naming conventions. The parameter name changes are as follows:

     ISDC Parameter Name        HEASARC Parameter Name

          ra_x                       ra
          dec_x                      dec
          ing_dt                     ingest_date
          crea_dt                    creation_date
          jmx1mode                   jemx1_mode
          jmx2mode                   jemx2_mode
          spimode                    spi_mode
          ibismode                   ibis_mode
          omcmode                    omc_mode
          dsize                      data_size
          ps                         status

Parameters

PI_Name
The name of the Principal Investigator.

Obs_Type
The type of observation: 'GPS', 'GCDE', 'Core', 'General', 'Special', 'Calibration', 'TOO', 'Engineering', 'ISWT survey', or 'not specified'. 

ScW_Type
The type of science window: 'pointing', 'slew', or 'engineering'. Normally, this should be set to 'pointing'.

Obs_ID
The Observation ID (AATPPPPOOOO) as defined by the INTEGRAL Science Operations Center (ISOC), if any. Typically, each targeted observation under a given proposal has a unique Obs_ID. Core Program GPS scans or GCDE sequences may also have unique Obs_IDs.

ScW_ID
The name of any Science Window is the Science Window IDentifier (ScW_ID). This ID always consists of 12 digits of the form:

                                    RRRRPPPPSSSF
  

   *  RRRR is the revolution number of the S/C as defined from perigee passage,
   *  PPPP is the pointing number within the revolution and is always reset
      to "0000" when the revolution number increments,
   *  SSS is the subdivision number for a Science Window with a given RRRR
      and PPPP value. The minimum value of SSS allowed is "001" and always
      resets with a change of value of PPPP, and
   *  F is the type identifier of the Science Window with allowed values of
      (0) for "Pointing", (1) for "Slew", and (2) for "Engineering".
  

ScW_Ver
The Science Window Version, usually '001'.

RA
The Right Ascension of the spacecraft's x-axis. Note that the spacecraft's coordinate system is defined in such a way that the x-axis (rather than z) is the instrument pointing direction.

Dec
The Declination of the spacecraft's x-axis. Note that the spacecraft's coordinate system is defined in such a way that the x-axis (rather than z) is the instrument pointing direction.

LII
The Galactic Longitude of the spacecraft's x-axis. Note that the spacecraft's coordinate system is defined in such a way that the x-axis (rather than z) is the instrument pointing direction.

BII
The Galactic Latitude of the spacecraft x-axis. Note that the spacecraft's coordinate system is defined in such a way that the x-axis (rather than z) is the instrument pointing direction.

RA_Z
The Right Ascension of the spacecraft's z-axis. Note that the spacecraft's coordinate system is defined in such a way that the x-axis (rather than z) is the instrument pointing direction.

Dec_Z
The Declination of the spacecraft's z-axis. Note that the spacecraft's coordinate system is defined in such a way that the x-axis (rather than z) is the instrument pointing direction.

PosAngle
The position angle of the spacecraft, in degrees.

IJD_Start
The start date of the science window, in ISDC Julian Date (IJD) format. Note: Julian Date - ISDC Julian Date = 2,451,544.5, or, equivalently, IJD = MJD - 51544. Note that the IJD system adopted by the INTEGRAL Project is on the Terrestrial Time (TT) system.

IJD_End
The end date of the science window, in ISDC Julian Date (IJD) format. Note: Julian Date - ISDC Julian Date = 2,451,544.5, or, equivalently, IJD = MJD - 51544. Note that the IJD system adopted by the INTEGRAL Project is on the Terrestrial Time (TT) system.

Start_Date
The date and time of the start of the science window in UTC.

End_Date
The date and time of the end of the science window in UTC.

OBT_Start
The on-board start time of the science window, in spacecraft (OBT) time units.

OBT_End
The on-board end time of the science window, in spacecraft (OBT) time units.

SPI_Mode
The SPI mode code [11..99]. For most purposes, this can be ignored; the following codes are possible:

      Value     Meaning
       11       SPI OFF (Launch)
       12       SPI Inactive
       21       SPI STDBY
       22       SPI Eclipse
       31       SPI Configuration
       41       SPI Operational Normal
       42       SPI Emergency
       51       SPI Diagnostic
       61       SPI PSD Calibration
       71       SPI Cooling
       72       SPI Heat Pipes Thaw
       73       SPI Annealing
       74       SPI Outgassing
       96       SPI Unknown Mode
       98       SPI Mode change within science window
       99       SPI Undefined
  

IBIS_Mode
The IBIS mode code [11..99]. For most purposes, this can be ignored; the following codes are possible:

      Value     Meaning
       11       IBIS OFF
       21       IBIS Initialization (power safe)
       22       IBIS STDBY
       41       IBIS Observation standard
       42       IBIS Observation polarimetry
       43       IBIS Observation photon by photon
       51       IBIS Diagnostic
       52       IBIS Patch & Dump
       96       IBIS Unknown Mode
       98       IBIS Mode change within science window
       99       IBIS Undefined
  

JEMX1_Mode
The JEMX detector 1 mode code [11..99]. For most purposes, this can be ignored; the following codes are possible:

      Value     Meaning
       11       JEMX OFF
       21       JEMX STDBY CSSW
       22       JEMX STDBY IASW
       23       JEMX Safe
       31       JEMX Setup
       32       JEMX Setup HV ready
       41       JEMX Data taking (full imaging)
       42       JEMX Data taking (spectral-timing)
       43       JEMX Data taking (restricted imaging)
       44       JEMX Data taking (timing)
       45       JEMX Data taking (spectrum)
       51       JEMX Diagnostic
       52       JEMX Patch & Dump
       61       JEMX Calibration
       96       JEMX Unknown Mode
       98       JEMX Mode change within science window
       99       JEMX Undefined
  

JEMX2_Mode
The JEMX detector 2 mode code [11..99]. For most purposes, this can be ignored; the following codes are possible:

      Value     Meaning
       11       JEMX OFF
       21       JEMX STDBY CSSW
       22       JEMX STDBY IASW
       23       JEMX Safe
       31       JEMX Setup
       32       JEMX Setup HV ready
       41       JEMX Data taking (full imaging)
       42       JEMX Data taking (spectral-timing)
       43       JEMX Data taking (restricted imaging)
       44       JEMX Data taking (timing)
       45       JEMX Data taking (spectrum)
       51       JEMX Diagnostic
       52       JEMX Patch & Dump
       61       JEMX Calibration
       96       JEMX Unknown Mode
       98       JEMX Mode change within science window
       99       JEMX Undefined
  

OMC_Mode
The OMC mode code [11..99]. For most purposes, this can be ignored; the following codes are possible:

      Value     Meaning
       11       OMC OFF
       21       OMC STDBY
       22       OMC Safe
       41       OMC Science Fast Monitor
       42       OMC Science Normal
       43       OMC Science Trigger
       51       OMC Testing Standard
       61       OMC DC Calibration (Dark Current)
       62       OMC FF Calibration (Flat Field)
       71       OMC Baking
       96       OMC Unknown Mode
       98       OMC Mode change within science window
       99       OMC Undefined
  

Good_SPI
The "good" SPI exposure time, in seconds. Note that slew data typically have good exposures of less than 120 seconds, so that selecting values of this parameter > 120 s is is a good way to exclude slew data.

Good_PICSIT
The "good" PICSIT exposure time, in seconds. Note that slew data typically have good exposures of less than 120 seconds, so that selecting values of this parameter > 120 s is a good way to exclude slew data.

Good_ISGRI
The "good" ISGRI exposure time, in seconds. Note that slew data typically have good exposures of less than 120 seconds, so that selecting values of this parameter > 120 s is a good way to exclude slew data.

Good_JEMX1
The "good" JEMX1 exposure time, in seconds. Note that slew data typically have good exposures of less than 120 seconds, so that selecting values of this parameter > 120 s is a good way to exclude slew data.

Good_JEMX2
The "good" JEMX2 exposure time, in seconds. Note that slew data typically have good exposures of less than 120 seconds, so that selecting values of this parameter > 120 s is a good way to exclude slew data.

Good_OMC
The "good" OMC exposure time, in seconds. Note that slew data typically have good exposures of less than 120 seconds, so that selecting values of this parameter > 120 s is a good way to exclude slew data.

Status
The proprietary status of the science window: 'private' or 'public'. All INTEGRAL data products are expected to enter the public domain approximately one year after they are processed.

Data_Size
The total size of all data stored in the science window directory tree for the specified dataset, in bytes.

Creation_Date
The creation (processing) date and time of the science window.

Ingest_Date
The ingest date of the science window, i.e, the date when the processed data were ingested into the ISDC Archive. In general, data will become public one year after their ingest date.

Exp_ID
The Exposure IDentifier parameter uniquely identifies the exposure.

Contact Person